Mix it up
Glorious bathroom saturation - deliver the water to your bath in style with this designer feel mono bath mixer tap. Featuring beautiful twin easi grip controls and short spout finished in bright shiny chrome, an aerator tucked into the spout, and slim colour bands below the control knobs to indicate hot and cold - well you wouldn't want any nasty surprises when you turned on your tap first thing in the morning!

Low Pressure by Design
This mixer is ideal for low water pressure. (although this mixer does perform just as well in higher pressure systems.) The holes inside the tap and the ceramic valves are bigger than usual and allow a good flow of water without the need for high pressures. This mixer tap has 3/4 inch BSP (British Standard Pipe) threaded inlets which means it can be fed with big pipes. This tap will work with water pressure as low as 0.2 bar and up to 5.0 bar. If your tank is 2 metres above the outlet of your tap then this tap will work well. If you have higher water pressure then you will just get more water out.

This tap works well with the following systems:
Combination boiler systems
Pumped hot water systems (i.e. systems with shower pumps).
Mega-flow system
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Standard unpressurised hot water cylinder systems (Tank in the loft systems)

Crunch those numbers
Total height: 140mm
Width at widest: 243mm
Depth: 160mm
Reach of spout: 125mm
Height above tub: 95mm
Distance between pipe centres: 180mm