Mix it up
Glorious bathroom saturation - deliver the water to your basin in style with this designer feel contemporary mono basin mixer tap. Featuring beautiful twin chunky cross-head controls and short spout finished in bright shiny chrome, an aerator tucked into the spout, slim colour bands next to the control knobs to indicate hot and cold. - well you wouldn't want any nasty surprises when you turned on your tap first thing in the morning!
This tap has a hole in the back for a pop up waste - the one in the photo is not included. Take a look in our waste section to find what you need.

Low Pressure by Design
Who says you can't have it all? Here we have the elegance of traditional style with the benefits of modern convenience.
This tap is designed to work with both low and high pressure water. The holes inside the tap and the ceramic valves are bigger than usual and allow a good flow of water without high pressures. The tap has 1/2 inch BSP (British Standard Pipe) threaded inlets. The specified pressure range is 0.2 to 5.0bar. If your tank is 2 metres above the outlet of your tap then this tap will work. If you have higher water pressure then you will just get more water out.

This tap works well with the following systems:
Combination boiler systems
Pumped hot water systems (i.e. systems with shower pumps).
Mega-flow system
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Standard unpressurised hot water cylinder systems (Tank in the loft systems)

Crunch those numbers
Total height: 115mm
Width at widest: 175mm
Depth: 140mm
Reach of spout: 110mm
Height above basin: 115mm