Mix it up
The ceramic technology and innovation used in the construction of the valve guarantees long “drip free” life and ensures accurate flow control whilst the aerator dispenses immense saturation offering a delicious 'gargantuan gush'.

Low Pressure by Design
Who says you can't have it all? Here we have the elegance of traditional style with the benefits of modern convenience.
This tap is designed to work with both low and high pressure water. The holes inside the tap and the ceramic valves are bigger than usual and allow a good flow of water without high pressures. The tap has 1/2 inch BSP (British Standard Pipe) threaded inlets. The specified pressure range is 0.2 to 5.0bar. If your tank is 2 metres above the outlet of your tap then this tap will work. If you have higher water pressure then you will just get more water out.

This tap works well with the following systems:
Combination boiler systems
Pumped hot water systems (i.e. systems with shower pumps).
Mega-flow system
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Standard unpressurised hot water cylinder systems (Tank in the loft systems)

Crunch those numbers
Total height: 100mm
Width at widest: 190mm
Depth: 130mm
Reach of spout: 100mm
Height above basin: 100mm